FAQ

To serve you better, we've assembled a list of our customers' most frequently asked questions. If you don't find your answer here, feel free to email us.     

    [email protected] 

You may not have - the numbers on your meter may have been transposed or hard to read. You could possibly have a leaky toilet or faucet that's difficult to detect. Email us at [email protected]

Check your meter and the surrounding area for possible leaks. Next, call Water & Wastewater Sevices and report low pressure for your area. 

Waster & Wastewater Services    Phone:360-630-0970

A repair could have been completed recently allowing air to enter the line, causing the milky look.

All public water systems are required to maintain a minimum chlorine level of 0.2 mg/L (tested at the end of each line) by state law. Systems that use chloramine as a disinfectant must maintain a level of 0.5 mg/L by state law. Our disinfectant levels are tested daily to ensure safety.

Most likely your water heater needs to be flushed. CAUTION: Most manufacturers recommend hiring a professional to flush your water heater. If you plan on doing this yourself, read the owner's manual to keep from being hurt and or damaging the water heater.

We may have received it after the due date or we may not have received it at all. Email  our office and we will help you solve the problem.  [email protected]